The Best Way to Generate a wooden Stairs to the second floor Together with your own hands — drawings and instructions
Blueprints of stairs, presented on the web, make it simple to pick the perfect option. But every house has its own layout attributes. Thus, ready-made alternatives might not work. Yes, and left by his own hands drawing, and that will be set up stairs, will be a unique source of pride of the owner in front of relatives, acquaintances, friends.
To Start with, ascertain the location of their future design and create the following dimensions:
- The height of the opening. As the basis is taken the finishing floor, the first and second floors. The distance from one to another is the necessary parameter.
- The diameter of this opening. It ought to be noted that it can have another configuration: by the very widely used — rectangular to shaped (circle, oval or alternative non invasive performance). This parameter considerably affects the selection of layout.
- Height in the ceiling into the floor of the floor. Ultimately will allow you to figure the height of the passage and the suitable design and building of the staircase in the house.
Diagram and drawing of the staircase with dimensions in height and width. Draws a scale design of the first floor at a private home. A location is well defined for the start of the stairs, the amount of the flight of staircase is marked on the floor. If the design of this first floor at the place of the structure has projections, window and door openings, niches, communications, and then they are drawn from the scheme with a reference to its supporting structures. These stop them from overlapping even at the design stage. The more details and measurements in the program, the fewer problems during installation.
Before developing a drawing, then you should carefully study the construction standards on your stairs:
- The thickness, width, height of the steps along the whole length of this structure should not change. This ensures the ease and security of motion;
- The width of this stairwell for directly flights of stairs must be in 900 mm, for spiral arrangements from 800 mm;
- The elevation of the fencing 900-1200 mm. It is better if It’s provided on both sides of the staircase;
- The drawing together with the dimensions of height of a ladder handrail
For skipped designs on the narrowest portion of at least 100 mm, on the wide to 400 mm, at the center of 200-250 mm. Overhang of treads around 50 mm is permitted;
- The height of the measures ought to be in the scope of 100-180 mm
- The angle of incline up to 45˚;
- When the staircase go directly to the doorway, is equipped with another platform width of a meter;
- The recommended amount of steps for you airport — 18 pcs. For the running measures -16 pcs;
- The height of a passage less than 1 900-2 000 mm (minimum distance from step to the ground of the next floor);
- The thickness of this material for your design.
- Proper drawings of https://masterprofnastila.ru/ the stairs to the second floor can be made only on the basis of those parameters and further calculations. Every type of construction has its own characteristics.
Drawing of the stairs to the second floor
There are several ways to compile layout documentation:
- Independently. Make a calculation and perform staircase drawing simple designs (directly, rotary with a stage ) under force for most. More complex choices are much better left to professionals
- Ready-made options. Drawings of stairs presented on the Internet can be offered with detailed detailing and without it. Such projects should be assessed for compliance with calculations and building regulations. For advice, you can turn to professionals.
They permit you to make a detailed design, to receive a visualization of the structure before setup and to make adjustments. Employing 3D images you can see how the stairs will fit into the surrounding interior. In this scenario it may take a few days to master the software;